Problems after upgrading to 4.10.5

Hi, after upgrading i get the following error message:

Ouch! The installation failed.
COMBINED STDOUT/STDERR OUTPUT OF FAILED COMMAND:
Reading package lists…
Building dependency tree…
Reading state information…
gnupg is already the newest version (2.2.27-2+deb11u2).
net-tools is already the newest version (1.60+git20181103.0eebece-1).
software-properties-common is already the newest version (0.96.20.2-2.1).
curl is already the newest version (7.74.0-1.3+deb11u2).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Setting up globaleaks (4.10.5) …
Job for globaleaks.service failed because the control process exited with error code.
See “systemctl status globaleaks.service” and “journalctl -xe” for details.
invoke-rc.d: initscript globaleaks, action “restart” failed.

  • globaleaks.service - LSB: Start the GlobaLeaks server.
    Loaded: loaded (/etc/init.d/globaleaks; generated)
    Active: failed (Result: exit-code) since Wed 2022-08-24 13:34:55 UTC; 5ms ago
    Docs: man:systemd-sysv-generator(8)
    Process: 4627 ExecStart=/etc/init.d/globaleaks start (code=exited, status=1/FAILURE)
    CPU: 40ms

Aug 24 13:34:55 lxc-test systemd[1]: Starting LSB: Start the GlobaLeaks server…
Aug 24 13:34:55 lxc-test globaleaks[4627]: Starting GlobaLeaks daemon: globaleaksStarting …Enabling Globaleaks Network Sandboxing…done.
Aug 24 13:34:55 lxc-test globaleaks[4664]: mkdir: cannot create directory ‘/dev/shm/globaleaks’: File exists
Aug 24 13:34:55 lxc-test globaleaks[4627]: GlobaLeaks Apparmor Sandboxing Failure: requires apparmor …
Aug 24 13:34:55 lxc-test globaleaks[4667]: failed!
Aug 24 13:34:55 lxc-test systemd[1]: globaleaks.service: Control process exited, code=exited, status=1/FAILURE
Aug 24 13:34:55 lxc-test systemd[1]: globaleaks.service: Failed with result ‘exit-code’.
Aug 24 13:34:55 lxc-test systemd[1]: Failed to start LSB: Start the GlobaLeaks server…
dpkg: error processing package globaleaks (–configure):
installed globaleaks package post-installation script subprocess returned error exit status 1
Errors were encountered while processing:
globaleaks
E: Sub-process /usr/bin/dpkg returned an error code (1)

Can someone help, please?

Same over here:
Ouch! The installation failed.
COMBINED STDOUT/STDERR OUTPUT OF FAILED COMMAND:
Reading package lists…
Building dependency tree…
Reading state information…
gnupg is already the newest version (2.2.27-2+deb11u2).
net-tools is already the newest version (1.60+git20181103.0eebece-1).
software-properties-common is already the newest version (0.96.20.2-2.1).
curl is already the newest version (7.74.0-1.3+deb11u2).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Setting up globaleaks (4.10.5) …
Job for globaleaks.service failed because the control process exited with error code.
See “systemctl status globaleaks.service” and “journalctl -xe” for details.
invoke-rc.d: initscript globaleaks, action “restart” failed.
● globaleaks.service - LSB: Start the GlobaLeaks server.
Loaded: loaded (/etc/init.d/globaleaks; generated)
Active: failed (Result: exit-code) since Thu 2022-08-25 09:52:54 CEST; 16ms ago
Docs: man:systemd-sysv-generator(8)
Process: 2570 ExecStart=/etc/init.d/globaleaks start (code=exited, status=1/FAILURE)
CPU: 2.219s

Aug 25 09:52:51 Globaleaks systemd[1]: Starting LSB: Start the GlobaLeaks server…
Aug 25 09:52:54 Globaleaks globaleaks[2570]: Starting GlobaLeaks daemon: globaleaksStarting …Enabling Globaleaks Network Sandboxing…done.
Aug 25 09:52:54 Globaleaks globaleaks[2609]: mkdir: cannot create directory ‘/dev/shm/globaleaks’: File exists
Aug 25 09:52:54 Globaleaks globaleaks[2570]: GlobaLeaks Apparmor Sandboxing Failure: requires apparmor …
Aug 25 09:52:54 Globaleaks globaleaks[2612]: failed!
Aug 25 09:52:54 Globaleaks systemd[1]: globaleaks.service: Control process exited, code=exited, status=1/FAILURE
Aug 25 09:52:54 Globaleaks systemd[1]: globaleaks.service: Failed with result ‘exit-code’.
Aug 25 09:52:54 Globaleaks systemd[1]: Failed to start LSB: Start the GlobaLeaks server…
Aug 25 09:52:54 Globaleaks systemd[1]: globaleaks.service: Consumed 2.219s CPU time.
dpkg: error processing package globaleaks (–configure):
installed globaleaks package post-installation script subprocess returned error exit status 1
Errors were encountered while processing:
globaleaks
E: Sub-process /usr/bin/dpkg returned an error code (1)

Anyone any ideas?

Edit I was able to get the http Site up by starting globaleaks manualy on ssh console.
But tor is not running : Onion Site not found

Any help is apreciated.

Even the Attempt to uninstall and re install globaleaks with todays actual Version is not Successful.
Complaints about Apparmor again.
Btw Trying to upgrade a previous running version on an rasberry Pi 4 with Debian Bullseye

See output:

{redacted} $ sudo ./install-globaleaks.sh
Running the GlobaLeaks installation...
In case of failure please report encountered issues to the ticketing system at: https://github.com/globaleaks/GlobaLeaks/issues

Detected OS: Debian - bullseye
Running: "/etc/init.d/globaleaks stop"... SUCCESS
Running: "apt-get -y update"... SUCCESS
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
tzdata is already the newest version (2021a-1+deb11u5).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

Current default time zone: 'Europe/Berlin'
Local time is now:      Tue Aug 30 14:32:26 CEST 2022.
Universal Time is now:  Tue Aug 30 12:32:26 UTC 2022.

Running: "apt-get -y install curl gnupg net-tools software-properties-common"... SUCCESS
Running: "is_tcp_sock_free_check 0.0.0.0:80"... SUCCESS
Running: "is_tcp_sock_free_check 0.0.0.0:443"... SUCCESS
Running: "is_tcp_sock_free_check 127.0.0.1:8082"... SUCCESS
Running: "is_tcp_sock_free_check 127.0.0.1:8083"... SUCCESS
 + required TCP sockets open
Adding GlobaLeaks PGP key to trusted APT keys
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key(8)).
100  5519  100  5519    0     0  27457      0 --:--:-- --:--:-- --:--:-- 27457
OK
Updating GlobaLeaks apt source.list in /etc/apt/sources.list.d/globaleaks.list ...
Running: "apt-get update -y"... SUCCESS
Running: "apt-get install globaleaks -y"... FAIL
Ouch! The installation failed.
COMBINED STDOUT/STDERR OUTPUT OF FAILED COMMAND:
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
  apparmor apparmor-utils geoip-database iptables libgeoip1 libip6tc2
  libnetfilter-conntrack3 libnfnetlink0 libsodium23 python3-acme
  python3-apparmor python3-attr python3-automat python3-bcrypt python3-click
  python3-colorama python3-constantly python3-debian python3-geoip
  python3-gnupg python3-h2 python3-hamcrest python3-hpack python3-hyperframe
  python3-hyperlink python3-incremental python3-josepy python3-libapparmor
  python3-nacl python3-priority python3-pyasn1 python3-pyasn1-modules
  python3-requests-toolbelt python3-rfc3339 python3-service-identity
  python3-sqlalchemy python3-sqlalchemy-ext python3-twisted
  python3-twisted-bin python3-txtorcon python3-tz python3-zope.interface tor
  tor-geoipdb torsocks
Suggested packages:
  apparmor-profiles-extra vim-addon-manager firewalld geoip-bin
  python-acme-doc python-attr-doc python-nacl-doc python-sqlalchemy-doc
  python3-fdb python3-pymssql python3-mysqldb python3-psycopg2 python3-tk
  python3-pampy python3-qt4 python3-serial python3-wxgtk2.8
  python3-twisted-bin-dbg mixmaster torbrowser-launcher socat tor-arm
  obfs4proxy
The following NEW packages will be installed:
  apparmor apparmor-utils geoip-database globaleaks iptables libgeoip1
  libip6tc2 libnetfilter-conntrack3 libnfnetlink0 libsodium23 python3-acme
  python3-apparmor python3-attr python3-automat python3-bcrypt python3-click
  python3-colorama python3-constantly python3-debian python3-geoip
  python3-gnupg python3-h2 python3-hamcrest python3-hpack python3-hyperframe
  python3-hyperlink python3-incremental python3-josepy python3-libapparmor
  python3-nacl python3-priority python3-pyasn1 python3-pyasn1-modules
  python3-requests-toolbelt python3-rfc3339 python3-service-identity
  python3-sqlalchemy python3-sqlalchemy-ext python3-twisted
  python3-twisted-bin python3-txtorcon python3-tz python3-zope.interface tor
  tor-geoipdb torsocks
Preconfiguring packages ...
0 upgraded, 46 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/15.6 MB of archives.
After this operation, 73.4 MB of additional disk space will be used.
Selecting previously unselected package apparmor.
(Reading database ... 37604 files and directories currently installed.)
Preparing to unpack .../00-apparmor_2.13.6-10_arm64.deb ...
Unpacking apparmor (2.13.6-10) ...
Selecting previously unselected package python3-libapparmor.
Preparing to unpack .../01-python3-libapparmor_2.13.6-10_arm64.deb ...
Unpacking python3-libapparmor (2.13.6-10) ...
Selecting previously unselected package python3-apparmor.
Preparing to unpack .../02-python3-apparmor_2.13.6-10_arm64.deb ...
Unpacking python3-apparmor (2.13.6-10) ...
Selecting previously unselected package apparmor-utils.
Preparing to unpack .../03-apparmor-utils_2.13.6-10_arm64.deb ...
Unpacking apparmor-utils (2.13.6-10) ...
Selecting previously unselected package geoip-database.
Preparing to unpack .../04-geoip-database_20191224-3_all.deb ...
Unpacking geoip-database (20191224-3) ...
Selecting previously unselected package libip6tc2:arm64.
Preparing to unpack .../05-libip6tc2_1.8.7-1_arm64.deb ...
Unpacking libip6tc2:arm64 (1.8.7-1) ...
Selecting previously unselected package libnfnetlink0:arm64.
Preparing to unpack .../06-libnfnetlink0_1.0.1-3+b1_arm64.deb ...
Unpacking libnfnetlink0:arm64 (1.0.1-3+b1) ...
Selecting previously unselected package libnetfilter-conntrack3:arm64.
Preparing to unpack .../07-libnetfilter-conntrack3_1.0.8-3_arm64.deb ...
Unpacking libnetfilter-conntrack3:arm64 (1.0.8-3) ...
Selecting previously unselected package iptables.
Preparing to unpack .../08-iptables_1.8.7-1_arm64.deb ...
Unpacking iptables (1.8.7-1) ...
Selecting previously unselected package python3-josepy.
Preparing to unpack .../09-python3-josepy_1.2.0-2_all.deb ...
Unpacking python3-josepy (1.2.0-2) ...
Selecting previously unselected package python3-requests-toolbelt.
Preparing to unpack .../10-python3-requests-toolbelt_0.9.1-1_all.deb ...
Unpacking python3-requests-toolbelt (0.9.1-1) ...
Selecting previously unselected package python3-tz.
Preparing to unpack .../11-python3-tz_2021.1-1_all.deb ...
Unpacking python3-tz (2021.1-1) ...
Selecting previously unselected package python3-rfc3339.
Preparing to unpack .../12-python3-rfc3339_1.1-2_all.deb ...
Unpacking python3-rfc3339 (1.1-2) ...
Selecting previously unselected package python3-acme.
Preparing to unpack .../13-python3-acme_1.12.0-2_all.deb ...
Unpacking python3-acme (1.12.0-2) ...
Selecting previously unselected package python3-debian.
Preparing to unpack .../14-python3-debian_0.1.39_all.deb ...
Unpacking python3-debian (0.1.39) ...
Selecting previously unselected package python3-hpack.
Preparing to unpack .../15-python3-hpack_4.0.0-2_all.deb ...
Unpacking python3-hpack (4.0.0-2) ...
Selecting previously unselected package python3-hyperframe.
Preparing to unpack .../16-python3-hyperframe_6.0.0-1_all.deb ...
Unpacking python3-hyperframe (6.0.0-1) ...
Selecting previously unselected package python3-h2.
Preparing to unpack .../17-python3-h2_4.0.0-3_all.deb ...
Unpacking python3-h2 (4.0.0-3) ...
Selecting previously unselected package libsodium23:arm64.
Preparing to unpack .../18-libsodium23_1.0.18-1_arm64.deb ...
Unpacking libsodium23:arm64 (1.0.18-1) ...
Selecting previously unselected package python3-nacl.
Preparing to unpack .../19-python3-nacl_1.4.0-1+b1_arm64.deb ...
Unpacking python3-nacl (1.4.0-1+b1) ...
Selecting previously unselected package python3-gnupg.
Preparing to unpack .../20-python3-gnupg_0.4.6-1_all.deb ...
Unpacking python3-gnupg (0.4.6-1) ...
Selecting previously unselected package python3-priority.
Preparing to unpack .../21-python3-priority_1.3.0-3_all.deb ...
Unpacking python3-priority (1.3.0-3) ...
Selecting previously unselected package python3-sqlalchemy.
Preparing to unpack .../22-python3-sqlalchemy_1.3.22+ds1-1_all.deb ...
Unpacking python3-sqlalchemy (1.3.22+ds1-1) ...
Selecting previously unselected package python3-attr.
Preparing to unpack .../23-python3-attr_20.3.0-1_all.deb ...
Unpacking python3-attr (20.3.0-1) ...
Selecting previously unselected package python3-automat.
Preparing to unpack .../24-python3-automat_20.2.0-1_all.deb ...
Unpacking python3-automat (20.2.0-1) ...
Selecting previously unselected package python3-constantly.
Preparing to unpack .../25-python3-constantly_15.1.0-2_all.deb ...
Unpacking python3-constantly (15.1.0-2) ...
Selecting previously unselected package python3-hyperlink.
Preparing to unpack .../26-python3-hyperlink_19.0.0-2_all.deb ...
Unpacking python3-hyperlink (19.0.0-2) ...
Selecting previously unselected package python3-incremental.
Preparing to unpack .../27-python3-incremental_17.5.0-1_all.deb ...
Unpacking python3-incremental (17.5.0-1) ...
Selecting previously unselected package python3-zope.interface.
Preparing to unpack .../28-python3-zope.interface_5.2.0-1_arm64.deb ...
Unpacking python3-zope.interface (5.2.0-1) ...
Selecting previously unselected package python3-twisted-bin:arm64.
Preparing to unpack .../29-python3-twisted-bin_20.3.0-7+deb11u1_arm64.deb ...
Unpacking python3-twisted-bin:arm64 (20.3.0-7+deb11u1) ...
Selecting previously unselected package python3-pyasn1.
Preparing to unpack .../30-python3-pyasn1_0.4.8-1_all.deb ...
Unpacking python3-pyasn1 (0.4.8-1) ...
Selecting previously unselected package python3-pyasn1-modules.
Preparing to unpack .../31-python3-pyasn1-modules_0.2.1-1_all.deb ...
Unpacking python3-pyasn1-modules (0.2.1-1) ...
Selecting previously unselected package python3-service-identity.
Preparing to unpack .../32-python3-service-identity_18.1.0-6_all.deb ...
Unpacking python3-service-identity (18.1.0-6) ...
Selecting previously unselected package python3-hamcrest.
Preparing to unpack .../33-python3-hamcrest_1.9.0-3_all.deb ...
Unpacking python3-hamcrest (1.9.0-3) ...
Selecting previously unselected package python3-bcrypt.
Preparing to unpack .../34-python3-bcrypt_3.1.7-4_arm64.deb ...
Unpacking python3-bcrypt (3.1.7-4) ...
Selecting previously unselected package python3-twisted.
Preparing to unpack .../35-python3-twisted_20.3.0-7+deb11u1_all.deb ...
Unpacking python3-twisted (20.3.0-7+deb11u1) ...
Selecting previously unselected package libgeoip1:arm64.
Preparing to unpack .../36-libgeoip1_1.6.12-7_arm64.deb ...
Unpacking libgeoip1:arm64 (1.6.12-7) ...
Selecting previously unselected package python3-geoip.
Preparing to unpack .../37-python3-geoip_1.3.2-3+b3_arm64.deb ...
Unpacking python3-geoip (1.3.2-3+b3) ...
Selecting previously unselected package python3-txtorcon.
Preparing to unpack .../38-python3-txtorcon_20.0.0-1_all.deb ...
Unpacking python3-txtorcon (20.0.0-1) ...
Selecting previously unselected package tor.
Preparing to unpack .../39-tor_0.4.5.10-1~deb11u1_arm64.deb ...
Unpacking tor (0.4.5.10-1~deb11u1) ...
Selecting previously unselected package globaleaks.
Preparing to unpack .../40-globaleaks_4.10.9_all.deb ...
Unpacking globaleaks (4.10.9) ...
Selecting previously unselected package python3-colorama.
Preparing to unpack .../41-python3-colorama_0.4.4-1_all.deb ...
Unpacking python3-colorama (0.4.4-1) ...
Selecting previously unselected package python3-click.
Preparing to unpack .../42-python3-click_7.1.2-1_all.deb ...
Unpacking python3-click (7.1.2-1) ...
Selecting previously unselected package python3-sqlalchemy-ext:arm64.
Preparing to unpack .../43-python3-sqlalchemy-ext_1.3.22+ds1-1_arm64.deb ...
Unpacking python3-sqlalchemy-ext:arm64 (1.3.22+ds1-1) ...
Selecting previously unselected package tor-geoipdb.
Preparing to unpack .../44-tor-geoipdb_0.4.5.10-1~deb11u1_all.deb ...
Unpacking tor-geoipdb (0.4.5.10-1~deb11u1) ...
Selecting previously unselected package torsocks.
Preparing to unpack .../45-torsocks_2.3.0-3_arm64.deb ...
Unpacking torsocks (2.3.0-3) ...
Setting up python3-libapparmor (2.13.6-10) ...
Setting up python3-attr (20.3.0-1) ...
Setting up python3-gnupg (0.4.6-1) ...
Setting up libsodium23:arm64 (1.0.18-1) ...
Setting up python3-requests-toolbelt (0.9.1-1) ...
Setting up python3-hyperframe (6.0.0-1) ...
Setting up python3-hpack (4.0.0-2) ...
Setting up python3-colorama (0.4.4-1) ...
Setting up python3-zope.interface (5.2.0-1) ...
Setting up libip6tc2:arm64 (1.8.7-1) ...
Setting up python3-bcrypt (3.1.7-4) ...
Setting up python3-automat (20.2.0-1) ...
Setting up python3-twisted-bin:arm64 (20.3.0-7+deb11u1) ...
Setting up python3-hamcrest (1.9.0-3) ...
Setting up python3-click (7.1.2-1) ...
Setting up python3-tz (2021.1-1) ...
Setting up python3-sqlalchemy (1.3.22+ds1-1) ...
Setting up apparmor (2.13.6-10) ...
Setting up python3-sqlalchemy-ext:arm64 (1.3.22+ds1-1) ...
Setting up python3-priority (1.3.0-3) ...
Setting up python3-incremental (17.5.0-1) ...
Setting up python3-debian (0.1.39) ...
Setting up python3-hyperlink (19.0.0-2) ...
Setting up python3-josepy (1.2.0-2) ...
Setting up libnfnetlink0:arm64 (1.0.1-3+b1) ...
Setting up tor (0.4.5.10-1~deb11u1) ...
Setting up python3-apparmor (2.13.6-10) ...
Setting up libgeoip1:arm64 (1.6.12-7) ...
Setting up python3-pyasn1 (0.4.8-1) ...
Setting up python3-constantly (15.1.0-2) ...
Setting up python3-h2 (4.0.0-3) ...
Setting up geoip-database (20191224-3) ...
Setting up python3-rfc3339 (1.1-2) ...
Setting up torsocks (2.3.0-3) ...
Setting up python3-nacl (1.4.0-1+b1) ...
Setting up tor-geoipdb (0.4.5.10-1~deb11u1) ...
Setting up python3-acme (1.12.0-2) ...
Setting up python3-pyasn1-modules (0.2.1-1) ...
Setting up python3-service-identity (18.1.0-6) ...
Setting up apparmor-utils (2.13.6-10) ...
Setting up libnetfilter-conntrack3:arm64 (1.0.8-3) ...
Setting up python3-geoip (1.3.2-3+b3) ...
Setting up iptables (1.8.7-1) ...
update-alternatives: using /usr/sbin/iptables-legacy to provide /usr/sbin/iptables (iptables) in auto mode
update-alternatives: using /usr/sbin/ip6tables-legacy to provide /usr/sbin/ip6tables (ip6tables) in auto mode
update-alternatives: using /usr/sbin/iptables-nft to provide /usr/sbin/iptables (iptables) in auto mode
update-alternatives: using /usr/sbin/ip6tables-nft to provide /usr/sbin/ip6tables (ip6tables) in auto mode
update-alternatives: using /usr/sbin/arptables-nft to provide /usr/sbin/arptables (arptables) in auto mode
update-alternatives: using /usr/sbin/ebtables-nft to provide /usr/sbin/ebtables (ebtables) in auto mode
Setting up python3-twisted (20.3.0-7+deb11u1) ...
Setting up python3-txtorcon (20.0.0-1) ...
Setting up globaleaks (4.10.9) ...
Job for globaleaks.service failed because the control process exited with error code.
See "systemctl status globaleaks.service" and "journalctl -xe" for details.
invoke-rc.d: initscript globaleaks, action "restart" failed.
● globaleaks.service - LSB: Start the GlobaLeaks server.
     Loaded: loaded (/etc/init.d/globaleaks; generated)
     Active: failed (Result: exit-code) since Tue 2022-08-30 14:33:28 CEST; 15ms ago
       Docs: man:systemd-sysv-generator(8)
    Process: 3152 ExecStart=/etc/init.d/globaleaks start (code=exited, status=1/FAILURE)
        CPU: 2.268s

Aug 30 14:33:25 Globaleaks systemd[1]: Starting LSB: Start the GlobaLeaks server....
Aug 30 14:33:28 Globaleaks globaleaks[3152]: Starting GlobaLeaks daemon: globaleaksStarting ...Enabling Globaleaks Network Sandboxing...done.
Aug 30 14:33:28 Globaleaks globaleaks[3205]: mkdir: cannot create directory ‘/dev/shm/globaleaks’: File exists
Aug 30 14:33:28 Globaleaks globaleaks[3152]: GlobaLeaks Apparmor Sandboxing Failure: requires apparmor ...
Aug 30 14:33:28 Globaleaks globaleaks[3208]:  failed!
Aug 30 14:33:28 Globaleaks systemd[1]: globaleaks.service: Control process exited, code=exited, status=1/FAILURE
Aug 30 14:33:28 Globaleaks systemd[1]: globaleaks.service: Failed with result 'exit-code'.
Aug 30 14:33:28 Globaleaks systemd[1]: Failed to start LSB: Start the GlobaLeaks server..
Aug 30 14:33:28 Globaleaks systemd[1]: globaleaks.service: Consumed 2.268s CPU time.
dpkg: error processing package globaleaks (--configure):
 installed globaleaks package post-installation script subprocess returned error exit status 1
Processing triggers for man-db (2.9.4-2) ...
Processing triggers for libc-bin (2.31-13+rpt2+rpi1+deb11u3) ...
Errors were encountered while processing:
 globaleaks
E: Sub-process /usr/bin/dpkg returned an error code (1)

Today after announcement of 4.10.10 next try but still no luck:

[redacted] $ sudo ./install-globaleaks.sh
Running the GlobaLeaks installation...
In case of failure please report encountered issues to the ticketing system at: https://github.com/globaleaks/GlobaLeaks/issues

Detected OS: Debian - bullseye
Running: "/etc/init.d/globaleaks stop"... SUCCESS
Running: "apt-get -y update"... SUCCESS
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
tzdata is already the newest version (2021a-1+deb11u5).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

Current default time zone: 'Europe/Berlin'
Local time is now:      Fri Sep  2 09:10:54 CEST 2022.
Universal Time is now:  Fri Sep  2 07:10:54 UTC 2022.

Running: "apt-get -y install curl gnupg net-tools software-properties-common"... SUCCESS
Running: "is_tcp_sock_free_check 0.0.0.0:80"... SUCCESS
Running: "is_tcp_sock_free_check 0.0.0.0:443"... SUCCESS
Running: "is_tcp_sock_free_check 127.0.0.1:8082"... SUCCESS
Running: "is_tcp_sock_free_check 127.0.0.1:8083"... SUCCESS
 + required TCP sockets open
Adding GlobaLeaks PGP key to trusted APT keys
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key(8)).
100  5519  100  5519    0     0  26661      0 --:--:-- --:--:-- --:--:-- 26791
OK
Updating GlobaLeaks apt source.list in /etc/apt/sources.list.d/globaleaks.list ...
Running: "apt-get update -y"... SUCCESS
Running: "apt-get install globaleaks -y"... SUCCESS
Ouch! The installation is complete but GlobaLeaks failed to start.

again able to start it manually by sudo globaleaks but same result:
https working, Tor not working

Still exists with 4.10.14. Must stay at 4.9.9 :frowning:
apt-get install globaleaks=4.9.9